将您的计算机连接至一蓝牙设备

Before you can use a Bluetooth device like a mouse or a headset, you first need to connect your computer to the device. This is also called pairing the Bluetooth devices.

  1. Go to the desktop and start typing Bluetooth.

  2. Click on Bluetooth to open the panel.

  3. Make sure Bluetooth is enabled: the switch at the top should be set to on. With the panel open and the switch on, your computer will begin searching for devices.

  4. Make the other Bluetooth device discoverable or visible and place it within 5-10 meters (about 16-33 feet) of your computer.

  5. Click the device in the Devices list. The panel for the device will open.

  6. If required, confirm the PIN on your other device. The device should show you the PIN you see on your computer screen. Confirm the PIN on the device (you may need to click Pair or Confirm), then click Confirm on the computer.

    在大多数设备上，您需要在约 20 秒内完成输入，否则连接将无法完成。如果没有及时输入 PIN，请返回设备列表，重新开始。

  7. The entry for the device in the Devices list will show a Connected status.

  8. To edit the device, click on it in the Devices list. You will see a panel specific to the device. It may display additional options applicable to the type of device to which you are connecting.

  9. Close the panel once you have changed the settings.

顶部面板上的蓝牙图标

When one or more Bluetooth devices are connected, the Bluetooth icon appears in the system status area.