Estabelecer a configuración da rede manualmente

Se a súa rede non asigna a configuración de rede automaticamente ao seu computador, debe configurala manualmente inserindo as configuracións vostede mesmo. Este punto asume que vostede sabe as configuracións correctas para poder usalas. Se non é así, pregúntelle ao administrador de rede ou busque polas configuracións no seu «router» ou «switch» de rede.

Para estabelecer a configuración de rede manualmente:

  1. Go to the Desktop and start typing Settings.

  2. Prema en Preferencias.

  3. Se está conectado á rede co cable, prema Rede. En caso contrario prema Wifi.

    Make sure that your wireless card is turned on or a network cable is plugged in.

  4. Prema no botón preferencias.

    Para a conexión Wifi, o botón preferencias estará ao carón da rede activa.

  5. Select the IPv4 or IPv6 tab and change the Method to Manual.

  6. Type in the IP Address and Gateway, as well as the appropriate Netmask.

  7. In the DNS section, switch the Automatic switch to off. Enter the IP address of a DNS server you want to use. Enter additional DNS server addresses using the + button.

  8. In the Routes section, switch the Automatic switch to off. Enter the Address, Netmask, Gateway and Metric for a route you want to use. Enter additional routes using the + button.

  9. Click Apply. If you are not connected to the network, open the system menu from the right side of the taskbar and connect. Test the network settings by trying to visit a website or look at shared files on the network, for example.